Handboard models are widely used in factories, and can be verified based on product images or structural diagrams before mold opening to avoid losses. There are several stages from production to mass production, and each stage is indispensable. Let's take a look at the steps from Jinan hand board production to later mass production.
When developing and designing new products, designers need to first position themselves in the market. Based on the company's development plan and market positioning, choose a suitable new product for oneself. After determining the new product plan, use various operating software to design the required drawings. The drawings can be saved in multiple formats, which is conducive to multi-directional reference in the later product prototype proofing.
After designing the drawings for the new product, it is time to make a prototype to verify the feasibility of the design. The production process of a hand board is divided into four stages: preparation, design, processing, and post-processing. Each stage here is interconnected, and if one stage is not done well, it will affect the next stage.
Some parts have special requirements during molding and require the use of technologies such as warm runner, gas assisted molding, and nitrogen bottles. For general large-scale stamping hand board models, it is necessary to consider whether the machine tool has a cutting arrangement, and even whether there is lubricating oil, multi-station progressive, etc. In addition to the stamping tonnage, it is also necessary to consider the stamping frequency, feeding equipment, machine tool, and prototype model protection equipment.
After the steps of making the hand board are completed, the designer will test the hand board. If the test results are not satisfactory, the designer needs to modify the drawings based on the data and then revalidate them. If there are no issues with appearance and performance, we will proceed to the next step, small-scale production.
The purpose of small-scale production is to see if new products have new shortcomings. If there are no new defects, the mold can be prepared. After the mold is opened, it can be officially produced. Only after formal production can the product be put on the market and the enterprise begin to make profits. For more related matters, come to our website http://www.vlvpu.com Consultation and understanding!